| . |
|
ELECTRICAL SAFETY DESIGN |
. | |||
Wiring Design and Protection - Overcurrent Protection |
||||||
|
Conductors and equipment shall be protected from overcurrent
in accordance with their ability to safely conduct current. Feeders and
branch circuits over 600 volts, nominal shall also have short-circuit protection. The
requirements described on the following screens apply to overcurrent protection of
circuits rated 600 volts, nominal or less. An important, basic requirement for all overcurrent devices is to ensure they have adequate interrupt ratings for the circuit in which they will be installed. To review the purpose of conductors and overprotection devices click the term below.
|
|||||
|
||||||
| . |
