| . |
|
SPRAY FINISHING |
. | |||
Spray Booths |
||||||
|
If installed to promote an even flow of air through the spray
booth or to cause the deposit of overspray before it enters the exhaust duct,
distribution or baffle
plates shall be constructed of non-combustible material and readily removable or
accessible on both sides for cleaning. Such plates shall not be located in exhaust ducts. The conveyor openings shall be as small as practical where conveyors are arranged to carry work into and out of spray booths. Each spray booth shall be separated from other operations by not less than 3 feet or by such partition or wall as to reduce the danger from juxtaposition of hazardous operations. |
|||||
|
||||||
| . |
