. | SPRAY FINISHING |
. | |
Introduction |
|||
29 CFR 1910.107, "Spray Finishing Using Flammable and Combustible
Materials", is based on the National Fire Protection Association's, "Spray
Finishing Using Flammable and Combustible Materials", manual, 1969 edition. Many technological changes have occurred in the field of spray finishing since the 1969 edition was published. The current edition of NFPA 33 is entitled "Spray Application Using Flammable and Combustible Materials". It recognizes the hazards inherent to more current operations such as spray-up molding (e.g., fiberglass). |
|||
. |